{"id":605,"date":"2007-06-01T02:17:44","date_gmt":"2007-06-01T02:17:44","guid":{"rendered":"http:\/\/www.nargalzius.com\/blog2\/http:\/www.nargalzius.com\/blog2\/archives\/2007\/06\/2007_06_01_1017.php"},"modified":"2017-02-15T11:01:26","modified_gmt":"2017-02-15T11:01:26","slug":"harmonic-converger","status":"publish","type":"post","link":"http:\/\/nargalzius.com\/blog\/archives\/2007\/06\/01\/harmonic-converger","title":{"rendered":"Harmonic Converger"},"content":{"rendered":"<p>As I mentioned in an <a href=\"http:\/\/www.nargalzius.com\/blog\/archives\/2007\/05\/2007_05_11_1800.php\" title=\"view post\">old post,<\/a> I bought something called the <strong>Harmonic Converger.<\/strong> I put the device through its paces and have done my first full-length review of the thing &#8211; actually it&#8217;s my first full-length review of <em>anything.<\/em><\/p>\n<p>I&#8217;d like to remind people that I am not affiliated with the creator in any way, nor do I claim that this review be considered as &#8220;definitive.&#8221; However, through the methods I&#8217;ve used to test this device; I am confident that this review, at this point in time, has a fairly accurate representation of a device that <em>ultimately,<\/em> will remain a mystery to everyone (due to the creator&#8217;s secrecy).<\/p>\n<p>If you wish to link to this review with a more user-friendly <code>URL<\/code>, you may use any of these:<\/p>\n<p><a href=\"http:\/\/www.nargalzius.com\/hc\">http:\/\/www.nargalzius.com\/hc<\/a><br \/>\n<a href=\"http:\/\/www.nargalzius.com\/harmonic_converger\">http:\/\/www.nargalzius.com\/harmonic_converger<\/a><br \/>\n<a href=\"http:\/\/www.nargalzius.com\/hcreview\">http:\/\/www.nargalzius.com\/hcreview<\/a>  <\/p>\n<h2>Goal<\/h2>\n<p>The goal of this review is to <em>invite<\/em> people to have a listen, and hopefully relate to the potential benefits the Harmonic Converger may have on one&#8217;s tone. It, in no way, is asserting that people <em>need<\/em> the HC to solve anything that may (or may not) be existing in their current &#8220;setup.&#8221;<\/p>\n<p>If you are perfectly happy with your tone, then good for you and you can stop reading now.<\/p>\n<p>If you aren&#8217;t, or at least feel that what you&#8217;re getting out of your current setup isn&#8217;t enough &#8211; or at the very least open to the possibility of improving what you already have, then read on.<\/p>\n<!-- \/\/ --><!--more--><!-- \/\/ -->\n<h2>Once Upon a Time<\/h2>\n<p>A few years back, there was a thread in the Line6 messageboard where people were discussing ways of addressing a nagging issue called &#8220;fizz&#8221; <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_1');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_1');\" ><sup id=\"footnote_plugin_tooltip_605_1_1\" class=\"footnote_plugin_tooltip_text\">1 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_1\" class=\"footnote_tooltip\">Which will be discussed in even greater detail later in the review<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_1').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_1', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> that came with tones that use a lot of <em>high-gain distortion<\/em> (hi-gain).<\/p>\n<p>One of the users then hinted at having developed some home-made circuit which addressed this issue quite effectively. As time went by, people doubted the existence of the said circuit and its &#8220;effects.&#8221; They had good reason to, as the user never really had any comparison clips to have them listen to&#8230; until he posted the following samples below <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_2');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_2');\" ><sup id=\"footnote_plugin_tooltip_605_1_2\" class=\"footnote_plugin_tooltip_text\">2 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_2\" class=\"footnote_tooltip\">I was lucky enough to download the samples, that old forum is now gone. Also take note that the clips start with the circuits ENGAGED, then switch on and off every so often.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_2').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_2', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306062571%3Fsecret_token%3Ds-oSjIZ&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306062662%3Fsecret_token%3Ds-yTVqz&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>The clips featured two different &#8220;circuits&#8221; doing two different things. However, one of them <em>clearly<\/em> solved the major issue of &#8220;fizz.&#8221; Everyone rejoiced and waited in anticipation for the user to start building and selling units&#8230; for a while.<\/p>\n<p>Alas, it was never intended to be a commercial product, hence issues ranging from payment options, customization, cost of parts and the <strong>hand-made<\/strong> building of the unit put the price in the $200-$300 range. Anticipation quickly turned into reservation, frustration, and incredulity &#8211; as they thought the product was ridiculously overpriced.<\/p>\n<p>One thing led to another, reputations were put into question, egos started flaring up, sides and loyalties were switched &#8211; it was a real mess. Yet regardless of who was &#8220;right&#8221; and &#8220;wrong&#8221; at that time, there was one clear fact; there <em>did<\/em> exist a mysterious circuit that can subjectively &#8220;improve&#8221; tone. Everyone who owned one <a href=\"http:\/\/www.harmony-central.com\/Effects\/Data\/RadTone\/Harmonic_Converger-1.html\" title=\"Read user reviews\">swore by it,<\/a> and everyone else continued trying to discredit it.<\/p>\n<p>Those two experimental circuits (and possibly more) have since then been incorporated into a single device &#8211; and has been constantly revised\/improved over time. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_3');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_3');\" ><sup id=\"footnote_plugin_tooltip_605_1_3\" class=\"footnote_plugin_tooltip_text\">3 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_3\" class=\"footnote_tooltip\">At least that&#8217;s what he says &#8211; we have no way of knowing, really.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_3').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_3', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> That device, is what people call the <strong>&#8220;Harmonic Converger.&#8221; (HC)<\/strong><\/p>\n<h2>More Than Meets the Ear<\/h2>\n<p>The problem of fizz seemed to be what prompted the creation of the HC. Yet simply calling it a &#8220;fizz-killer&#8221; doesn&#8217;t give justice to the said device. It is claimed to do much more in terms of &#8220;tonal transformation,&#8221; but for as long as its inventor is unwilling reveal the &#8220;secrets&#8221; of his circuitry, I guess people relating the unit to fizz alone, would be a harsh reality he&#8217;ll have to live with.<\/p>\n<p>The reason why most people focus more on the fizz-killing properties of the HC is simply because it is the most apparent effect that <em>anyone,<\/em> good ear or bad, can hear and relate to. So for this review, I will certainly try to mention and point out the other benefits and &#8220;effects&#8221; I [can] hear to the best of my abilities. But do not be surprised if I spend a great deal with discussing fizz, as it is what most people identify with.<\/p>\n<h2>What is this <em>&#8220;fizz&#8221;<\/em> you speak of?<\/h2>\n<p>Inventor Hadley (<em>aka<\/em> &#8220;Radley&#8221;) Hockensmith tries to describe this fizz in the Harmonic Converger&#8217;s <a href=\"http:\/\/bossgtcentral.com\/forum\/showthread.php?t=7574\" title=\"Visit offical information page\">&#8220;official&#8221; page.<\/a> He used very subjective words, but I&#8217;d be hard-pressed to find a better worded description of the phenomenon. Here&#8217;s a passage from the page.<\/p>\n<blockquote>\n<p>Have you ever noticed that many distortion tones have a bogus-sounding hi end (mosquito-esk), that is seemingly imported from another universe, and sounds totally foreign to the main body of the tone (I call these &#8220;orphaned highs&#8221;).<\/p>\n<\/blockquote>\n<p>In case you <em>still<\/em> can&#8217;t relate to what he&#8217;s talking about, try listening to the earlier clip(s) above, where you can hear the &#8220;fizz&#8221; quite clearly.<\/p>\n<p>It is worth mentioning though, that a lot of people claim <em>the only reason<\/em> that fizz is present is because people don&#8217;t take the time to dial in what they call &#8220;good tone.&#8221; To address that argument, I&#8217;ll have you listen to these two clips below. First is Pantera&#8217;s &#8220;Walk&#8221; from the album &#8220;Vulgar Display of Power&#8221; and &#8220;Yesterday Don&#8217;t Mean Shit&#8221; from their album &#8220;Reinventing the Steel&#8221;<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306062417%3Fsecret_token%3Ds-eRNmq&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306062414%3Fsecret_token%3Ds-AIvo9&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>Incidentally that fizz-riddled sound the late Dimebag Darrell in the &#8220;Walk&#8221; sample was present ever since <em>Cowboys from Hell<\/em> &#8211; and persisted up to <em>Far Beyond Driven.<\/em> In <em>The Great Southern Trendkill,<\/em> it was somewhat being addressed, and in <em>Reinventing the Steel,<\/em> it has been greatly [possibly even completely] eliminated (as you notice from the second clip).<\/p>\n<p>In context of those two commercial tones, we can see how the previous argument simply doesn&#8217;t hold any water. <strong>Both<\/strong> are awesome tones, that&#8217;s why they made it to the store shelves. The point of comparing these clips <strong>was not<\/strong> to say that one patch was better than the other but simply to prove that <em>fizz is <strong>not<\/strong> a function of good or bad tone.<\/em><\/p>\n<p>I guess at this point, it&#8217;s safe to say that we have established <strong>beyond any doubt,<\/strong> that the concept of fizz is real and present, and that anyone who claims otherwise is either of three things:<\/p>\n<ol>\n<li>\n<p><strong>They <em>can&#8217;t<\/em> hear it<\/strong>\nA number of reasons could contribute to this &#8211; ranging from really stupid to perfectly legitimate.  <\/p>\n<p>The stupid scenarios include the person being &#8220;deaf&#8221; (figuratively), or that they simply are too used to the sound already. The latter is specifically annoying because it&#8217;s thinking like that which allows corruption in governments to remain &#8211; because it&#8217;s been there since the beginning, so might as well get used to it.<\/p>\n<p>The legitimate scenario would be they have other gear in their signal chain that already masks out the fizz naturally (e.g. having a nice tube amp and speaker cabinet), or that the type of music they play simply doesn&#8217;t require them to dial-in tones that are prone to fizz.<\/p>\n<\/li>\n<li>\n<p><strong>They enjoy the sound of fizz<\/strong>\nI&#8217;m not being sarcastic here, there <em>are<\/em> instances where fizz is ideal. Personally, I would&#8217;ve wanted Lenny Kravitz&#8217; <em>&#8220;Are You Gonna Go My Way&#8221;<\/em> to <strong>have<\/strong> fizz (it doesn&#8217;t, FYI). I think fizz would lend well to that type of &#8220;feel&#8221; of the song.<\/p>\n<\/li>\n<li><strong>They&#8217;re too stubborn to admit it<\/strong>\nWe can&#8217;t deny the fact that we&#8217;ve spent quite a penny for our gear. So someone coming up claiming that our gear has some serious issue will certainly make for a hostile defensive argument. However, not everyone can draw the line between a legitimate defensive argument or mere <em>fanboy-ism.<\/em> I love my GT-8 as much as the next person, but I&#8217;ll be the first to admit its limitations &#8211; same goes for any other thing I own.<\/li>\n<\/ol>\n<p>There&#8217;s no point in trying to convince yourself to feel good about spending on something that&#8217;s far from perfect when that simply isn&#8217;t the case. Nothing in this world will be <em>ever<\/em> be perfect &#8211; <strong>deal with it!<\/strong><\/p>\n<p>Fizz is real, and wherever it exists, most of the time, is a serious issue &#8211; and if you&#8217;re a person who doesn&#8217;t like it (I know I don&#8217;t), then this review is for you.<\/p>\n<h2>The Art of Killing Fizz<\/h2>\n<p>Allow me to save time on a lot of future debate by saying straight out that <em>as far as fizz goes,<\/em> <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_4');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_4');\" ><sup id=\"footnote_plugin_tooltip_605_1_4\" class=\"footnote_plugin_tooltip_text\">4 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_4\" class=\"footnote_tooltip\">Take note I said AS FAR AS FIZZ GOES &#8211; because it would be tragic if you would dismiss the HC simply because you thought it was a mere fizz-killing device.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_4').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_4', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> <strong>nobody <em>really<\/em> needs the HC<\/strong> &#8211; or any other 3rd party solution for that matter. The fact that the Pantera clips weren&#8217;t using an HC already proves that point that it <em>can<\/em> be done without it. When using multi-effects (multi-fx) processors, you can certainly achieve a fizz-free tone a number of ways through commonly available resources &#8211; if you would only spend the time to do so.<\/p>\n<p>However, for most us who use &#8220;less than the best&#8221; equipment, it&#8217;s my opinion that in most cases, a bunch of these approaches are &#8220;workarounds&#8221; &#8211; real effective workarounds at that. Still, wouldn&#8217;t it be nice to <em>not<\/em> have to work around anything? Here are examples of &#8220;solutions&#8221; that I&#8217;ve heard people suggest, and my opinion regarding them:<\/p>\n<ol>\n<li>\n<p><strong>You can try EQing the fizz into oblivion.<\/strong>\nA tried and tested method. However instead of the EQ being used to really sculpt your tone, you end up using it to notch out the offending fizz frequencies (and possibly compromising the overall &#8220;tonal effectiveness&#8221; of your patch in the process).  <\/p>\n<p>What if you only got 3 bands to work with on that EQ, and your fizz lives in multiple areas of the spectrum? Not only have you used up your EQ just for that, but you can&#8217;t even eliminate it completely, let alone <em>further sculpt<\/em> your tone with it.<\/p>\n<\/li>\n<li>\n<p><strong>Use some clever phase-related trickery via a <em>chorus<\/em> effect.<\/strong>\nI&#8217;ve heard people swear by this, and I&#8217;m happy for them, but the chorus by nature wasn&#8217;t intended to address such issues. Instead of the chorus being available to you for a more useful purpose, you&#8217;ll use it as some sort of sonic band-aid.<\/p>\n<\/li>\n<li>\n<p><strong>Turn down the gain.<\/strong>\nSure, that works as well &#8211; at the expense of sacrificed sustain (among others).  <\/p>\n<p>The most important point though is that <em>hi-gain<\/em> is <em>hi-gain.<\/em> If you cut down on that gain, then it defeats the purpose of a &#8220;hi-gain&#8221; patch don&#8217;t you think? You can try your best, but there&#8217;s really no substitute for true hi-gain.<\/p>\n<\/li>\n<li><strong>Try different cabinet\/speaker\/mic sim combinations<\/strong>\nSure, you can definitely use combinations that produce the least amount [or if you&#8217;re lucky, <em>none<\/em>] of that fizz.<\/li>\n<\/ol>\n<p>You should realize by now how much you&#8217;ve limited the options available to you. You&#8217;re essentially choosing your combinations based on <em>avoiding fizz,<\/em> instead of actually finding the tone you like.<\/p>\n<p>There&#8217;s even one &#8220;non effects-based&#8221; solution, which is to ultimately run your rig through some solid-performing hardware at the end of the chain; like a real tube-amp and proper cabinets. These literally color the sound in a good way (and can probably eliminate the fizz naturally). But aside from costing a lot, it&#8217;s too cumbersome a setup. You&#8217;d have to have that rig handy <em>all the time<\/em> to get your ideal tone &#8211; which is probably a luxury only the rich and famous can enjoy.<\/p>\n<p>You can do a combination of any [or all] of the above mentioned &#8211; or add even more effects to help out. The more effects you use and tweak, you certainly have a better chance of eliminating most, if not all fizz &#8211; but just think of how many &#8220;soldiers&#8221; (effects) you had to sacrifice just to deal with that <strong>single<\/strong> issue. What if <em>other<\/em> issues popup at the latter stages of your tone-searching; you got more of those effects handy to deal with those? Hence my point that these are &#8220;workarounds&#8221; at best. The same argument stands with whatever effect &#8220;workaround&#8221; you can muster up.<\/p>\n<p>Truth of the matter is, if there was a way to be able to eliminate hi-gain distortion&#8217;s propensity for &#8220;fizz&#8221; without having to sacrifice your other tone-shaping tools for that single annoying purpose, then everyone would be happy &#8211; and we wouldn&#8217;t be having this discussion. However, this seems to be an area where digital effects processors seem to fall short &#8211; and is precisely the area where the HC shines.<\/p>\n<h2>The Harmonic Converger<\/h2>\n<div align=\"center\">\n<a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/232\/517466634_4d949b7747_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/232\/517466634_eeb3f636b5_m.jpg\"><\/a>\n<\/div>\n<p>I had a custom built mono HC which was made to work either on a loop <em>or<\/em> stereo (headphone) out. The only drawback I can see from this request is that while my HC it can take stereo (headphone) input, it will always output in mono (it just chooses and uses one channel). It was primarily designed to be used with loop circuitry, and the customization to accomodate the headphones was just a bonus request in case I wanted to try it with other gear. Since it was in mono, for me to get &#8220;stereo&#8221; effects while using the HC, the loop&#8217;s location in the effects chain must be <strong>before<\/strong> all stereo effects.<\/p>\n<p>The FAQ <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_5');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_5');\" ><sup id=\"footnote_plugin_tooltip_605_1_5\" class=\"footnote_plugin_tooltip_text\">5 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_5\" class=\"footnote_tooltip\">Frequently Asked Questions<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_5').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_5', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> section of <a href=\"http:\/\/bossgtcentral.com\/forum\/showthread.php?t=7574\" title=\"Visit offical information page\">Radley&#8217;s Corner<\/a> had this to say about it:<\/p>\n<blockquote>\n<p><code>Q:<\/code> <strong>Because the Loop HC is mono, does this mean I cannot use my GT8&#8217;s &#8220;stereo amp&#8221; feature?<\/strong><\/p>\n<p><code>A:<\/code> Not at all &#8211; you just have to use a somewhat different approach: Position the Loop\/HC <em>in-between<\/em> the OD and the Amp models in the GT chain, then select a distortion source from one of the many excellent GT OD\/Dist models. Now you can select any two clean (or semi-clean) GT amp models for left and right channels, along with different Cabs, Mics, as well as the dual amp delay setting &#8211; Phat City! ;o) Because the GT&#8217;s OD\/Dist model is the primary distortion source, the HC can add it&#8217;s magic <em>before<\/em> the stereo amps split to discreet stereo &#8211; this setup offers a huge amount of tonal flexibility and EQ, and is my main source of Solo tones.<\/p>\n<\/blockquote>\n<h2>Package Contents<\/h2>\n<div align=\"center\">\n<a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/212\/517466340_f2377c0fe8_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/212\/517466340_0eaa85f02a_m.jpg\"><\/a>\n<\/div>\n<p>It came <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/246\/517466278_219f8a1301_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">in a box<\/a> that was pretty inconspicuous and unassuming. Opening it revealed the following:<\/p>\n<ol>\n<li>\n<p><strong>Harmonic Converger<\/strong><br \/>\nI&#8217;m not quite sure when exactly Mr. Hockensmith started building HCs that looked like this, but I really think this design is a winner.<\/p>\n<\/li>\n<li>\n<p><strong>Special adjustment tool (2pcs)<\/strong><br \/>\nBasically, it&#8217;s just a wooden wedge (for lack of a better term). I do agree though that it was prudent to include such a tool, since it&#8217;s non-conductive and as the creator claims, will not strain the internal components as when you use metal tools with it.<\/p>\n<\/li>\n<li><strong>Documentation<\/strong><br \/>\nA &#8220;manual&#8221; if you will. It basically tells what the product is, what it does, why it was created, and how to effectively use it. Naturally, there&#8217;s no indication of any technical details because of the creator&#8217;s &#8220;secrecy.&#8221; Also, a piece of paper that notifies the user of the exisence of the said &#8220;adjustment tool.&#8221;\nIn my case, there was also a little post-it note reminding me what the heart-shaped sticker was for.<\/li>\n<\/ol>\n<h2>Inspecting the HC<\/h2>\n<p><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/253\/517490147_9265a82782_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/253\/517490147_acf07d937e_t.jpg\" align=\"right\" \/><\/a><\/p>\n<p>The unit itself is built like a tank. As you can see, it has come a long way since its <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/193\/516462437_3f4e8f4dc7_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">initial physical design.<\/a> It&#8217;s kind of hard to describe how impressive the built quality the HC has; the quality of the materials that were used. You really have to be holding one to know what I mean, but I&#8217;ll try anyways.<\/p>\n<p>For its outer shell, you have a black metal casing with approximate dimensions of 10cm x 5cm x 2.5cm. <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/253\/517490261_6cd7b2699e_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">This shot of the HC&#8217;s backside<\/a> may give you an idea on the &#8220;texture&#8221; of metal container. The backside also shows the 4 phillips screws that join the bottom plate and upper &#8220;container&#8221; together.<\/p>\n<p>Don&#8217;t get any ideas of opening it up though; the HC&#8217;s innards have been filled with epoxy. If you try opening it, chances are you&#8217;ll break it and end up with a $200+ paperweight, and that&#8217;s as &#8220;passive&#8221; as the HC can ever get \ud83d\ude09<\/p>\n<p>The casing feels feels really thick and hard when you tap\/flick it with your fingernails, (or maybe it&#8217;s because of the epoxy inside). Either way, Mr. Hockensmith wasn&#8217;t kidding when he said the thing is &#8220;overbuilt.&#8221;<\/p>\n<p><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/189\/517490509_5b1a2a1e78_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/189\/517490509_2d6f67f8b7_t.jpg\" align=\"right\" \/><\/a><\/p>\n<p>As I said earlier, my model was a mono loop\/headphone hybrid (but leaning more on the loop side of things) So I have two 1\/4&#8243; jacks on the same side. The reason I requested the in\/out to be on the same side was to make it easier to hook it up to the GT-8&#8217;s fx-loop (as you can see on the image on the right). It had that little heart-shaped sticker to indicate the input jack. A lot of people chuckled at it, but I think it&#8217;s appropriate; it&#8217;s like saying <em>&#8220;this is where all the <strong>love<\/strong> starts!&#8221;<\/em> In the event the sticker is removed, I simply made a mental note that the input is on the same side as the <em>drive adjustment pot.<\/em> <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_6');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_6');\" ><sup id=\"footnote_plugin_tooltip_605_1_6\" class=\"footnote_plugin_tooltip_text\">6 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_6\" class=\"footnote_tooltip\">Potentiometer<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_6').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_6', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<p><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/219\/517466474_2ad374a006_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/219\/517466474_10670c5206_t.jpg\" align=\"right\" \/><\/a><\/p>\n<p>The <em>drive adjustment pot<\/em> is basically a recessed area with a rubber frame\/guard. The pot is located deep inside which can be adjusted by the supplied &#8220;adjustment tool.&#8221; Unlike the initial design, which used a switch of 3 levels (normal\/bright\/dark), you can now control an incremental value of how much of the effect is applied. Starting from a bypass (fully turned counter-clockwise) to increasing amount of effect as you turn the pot clockwise.<\/p>\n<p>The &#8220;groove&#8221; in the pot (which the adjustment tool, <em>adjusts<\/em>) has been placed in such a way that you have an indication at what level effect you&#8217;re on. The bypass is roughly about a 30&#176; tilt from the bottom center going to the <em>left.<\/em> While the maximum effect is about the same degree of tilt, but going to the <em>right<\/em> instead.<\/p>\n<p>When trying to turn the pot, I can&#8217;t help but be impressed on how smooth it turns. I mean you guys must be thinking <em>&#8220;it&#8217;s a friggin&#8217; potentiometer! Just like your guitar knobs, of course it would turn smoothly the same way!&#8221;<\/em> This is true, but you have to understand, for anyone who sees (and holds) the HC for the first time, you have to admit that it&#8217;s basically a slab of metal with 2 jacks and some turn-thingie which looks like a screw &#8211; having that lone movable part perform like a swiss watch is certainly a welcome surprise.<\/p>\n<p>So from the physical attributes of this passive device, you can sort of already feel the level of professionalism put into building it. His openness to change his initial design based on user input shows his commitment to making a device that everyone would appreciate. His filling the unit with epoxy hit&#8217;s multiple birds with one stone.<\/p>\n<ol>\n<li>He gets to retain the secrecy of his circuitry.<\/li>\n<li>It acts like a big heatsink.<\/li>\n<li>It makes sure there&#8217;s no other moving part aside from the <em>drive adjustment pot.<\/em><\/li>\n<\/ol>\n<p>&#8220;Overbuilt&#8221; is certainly an apt description of the HC &#8211; which is <em>always<\/em> a good thing &#8211; especially if you spent more than 200 dollars on it.<\/p>\n<p>He even goes further with the documentation; he tells how to effectively use it, what not to use it with, things to do and avoid, etc. Even his stand on using the wooden adjustment tool reflects the care he puts into his creations. Honestly, if you ask me, I think it&#8217;s ok to use a screwdriver as long as you&#8217;re careful &#8211; in fact you probably don&#8217;t even have to be careful. Yet he advises you to not even try (using metal objects) just to be on the safe side, and that is a sensibility I truly appreciate. Better to cover all the bases, because most people aren&#8217;t as prudent as we&#8217;d all like them to be \ud83d\ude42<\/p>\n<p>The HC may or may not be hard to build (that will forever be a mystery), but either way, the level of quality in each (based on the unit I got) is a testament to Mr. Hockensmith&#8217;s commitment on giving each customer a flawless unit that&#8217;s up to the strictest of [his] standards. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_7');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_7');\" ><sup id=\"footnote_plugin_tooltip_605_1_7\" class=\"footnote_plugin_tooltip_text\">7 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_7\" class=\"footnote_tooltip\">And from what I&#8217;m seeing, it seems to be pretty high \ud83d\ude42 <\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_7').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_7', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<p>Now that we&#8217;re done with the whole &#8220;first impressions&#8221; bit, lets get right down to the meat of the issue. Lets see how the HC performs&#8230;<\/p>\n<h2>Show me the money!<\/h2>\n<p>Here&#8217;s what everyone&#8217;s been waiting for&#8230; audio clips! Below is the signal path I used to generate the sample clips with. It may not be much, but it does the job. I&#8217;ve made <a href=\"http:\/\/www.nargalzius.com\/music\" title=\"Visit music page\">many a song<\/a> with it already and it has never failed me yet.<\/p>\n<div align=\"center\">\n<a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/243\/517712619_a765ea3e49_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/243\/517712619_faa375202b_m.jpg\"><\/a>\n<\/div>\n<p>Since the HC is most known for its fizz-killing attributes, then I thought it would be a good idea to run the fizzy Pantera clip through the HC both via <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/201\/519676716_6269882fbc_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">stereo out<\/a> and through the <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/222\/519676808_764547bc26_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">fx-loop.<\/a><\/p>\n<p>So for the first batch of samples, here&#8217;s what I did to prepare the &#8220;commerical clips&#8221;:<\/p>\n<ol>\n<li>Rip a lossless copy of that intro from my <em>&#8220;Vulgar Display of Power&#8221;<\/em> CD<\/li>\n<li>Take one channel (I chose the right) to retain a mono signal; because merging the two channels together might cause some phase-related issues &#8211; and because my HC model works in mono.<\/li>\n<li>Edit the intro in such a way that it loops for a considerable amount of time.<\/li>\n<li>Plug that edited lossless wav file into my iPod and use it as a source to test the HC with.<\/li>\n<\/ol>\n<p>All the clips you will hear however, are MP3 files. Before you can complain about wanting lossless audio, let me assure you, you <em>will<\/em> still hear what you need to hear. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_8');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_8');\" ><sup id=\"footnote_plugin_tooltip_605_1_8\" class=\"footnote_plugin_tooltip_text\">8 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_8\" class=\"footnote_tooltip\">Just make sure you&#8217;re listening through good speakers or cans<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_8').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_8', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> I can really go into detail about all this &#8220;audio compression&#8221; business, but let&#8217;s just save it for another time shall we? I know my audio, and if you don&#8217;t trust me on that, then just stop reading now.<\/p>\n<p>First, let&#8217;s establish the formalities, this clip you&#8217;re going to listen to is the intro <strong>without the HC engaged.<\/strong> The significance of this clip, is that I alternated each &#8220;pulse&#8221; from 3 different sources of the same material, namely:<\/p>\n<ol>\n<li>Direct import of the ripped WAV file into the audio software.<\/li>\n<li><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/222\/519676808_764547bc26_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">Through GT-8&#8217;s effects loop (fx-loop)<\/a><\/li>\n<li><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/201\/519676716_6269882fbc_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\">iPod headphone out direct to HC<\/a><\/li>\n<\/ol>\n<p>The purpose of this clip to test the neutrality\/transparency of each &#8220;source&#8221; and establish that there is minimal or no coloration by the mixer, DI box, or GT-8 (with all effects off) Have a <a title=\"load audio content\" href=\"javascript:loadXML('\/music\/playerXML.php?path=\/downloads\/HCsamples\/walk_original_alternate.mp3&#38;title=Walk (original) alternating between 3 sources','AJAXdiv03')\">listen to the clip<\/a> yourself &#8211; it&#8217;s going to be last time you probably need to do so.<\/p>\n<div id=\"AJAXdiv03\">\n<\/div>\n<hr \/>\n<p>One method of sampling I think people would appreciate is if I&#8217;d turn the HC&#8217;s <em>drive adjustment pot<\/em> from bypass to maximum blend, and essentially sweep though the whole range the HC&#8217;s pot. This should make people hear the HC affecting the tone with all possible &#8220;values,&#8221; allowing them to make a more informed inference as to how the HC might be useful to them.<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063145%3Fsecret_token%3Ds-zOfOS&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063124%3Fsecret_token%3Ds-1JqZ2&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>Notice that the starting volume on the second sample is softer, this is because the HC is more &#8220;sensitive&#8221; when used directly from a stereo\/headphone out, so the effect is more pronounced. The initial recording clipped, so I adjusted it accordingly.<\/p>\n<p><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/240\/520180175_d1dc3db837_o.jpg\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/240\/520180175_8ecd3eccc6_t.jpg\" align=\"right\" \/><\/a><\/p>\n<p>It is worth noting though that the abrupt changes in the sound on the first stages of the &#8220;sweep clips&#8221; were <strong>not<\/strong> because I turned the pot too fast. Based on what I was hearing, the image on the right is something I whipped up that summarizes what my HC seemed to be doing as I swept though the pot:<\/p>\n<p>It is good to mention at this point that everything below is my opinion and mine alone. The circuitry and processes the HC uses is a mystery to all but its creator &#8211; so we can only hope to &#8220;interpret&#8221; them as best as our ears can hear, and as best as our words can articulate. So I will attempt to describe the effects of the HC in context of my limited knowledge on the device, and the sample audio clip used.<\/p>\n<p>The blue and purple area represents what I call &#8220;fizz-killer&#8221; section. This is where most of the timbre change happens &#8211; and those changes seemed to be specifically targeted to eliminating fizz. It&#8217;s a pretty narrow area; and once you enter the green area, fizz is virtually eliminated completely at that point and begins to brighten the resulting sound (hence my dubbing it the &#8220;brilliance&#8221; area).<\/p>\n<p>At that point, from what I&#8217;m hearing, the <strong>new<\/strong> &#8220;fundamental tone&#8221; <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_9');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_9');\" ><sup id=\"footnote_plugin_tooltip_605_1_9\" class=\"footnote_plugin_tooltip_text\">9 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_9\" class=\"footnote_tooltip\">As a result of having gone through the &#8220;fizz-killer&#8221; section.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_9').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_9', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> doesn&#8217;t change anymore &#8211; it simply adds &#8220;bite&#8221; to it. Other HC owners use words like <em>presence, snarl,<\/em> and <em>urgency<\/em> to describe the effect, but I think we&#8217;re all referring to the same effect of adding &#8220;brilliance&#8221; to the tone.<\/p>\n<p><a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/230\/520738698_b6d9be695a_o.gif\" target=\"_blank\" title=\"You may click on the image for more details\"><img decoding=\"async\" alt=\"\" src=\"http:\/\/farm1.static.flickr.com\/230\/520738698_d14e60aefa_t.jpg\" align=\"right\" \/><\/a><\/p>\n<p>Once you go beyond 50%, it gets even brighter. The higher you go, the less changes you&#8217;re likely to notice &#8211; but be assured that your tone is <em>still<\/em> being affected, as seen in the the waveforms to your right. The stereo-out method&#8217;s overall &#8220;brightness effect&#8221; is more pronounced. So a 50% on the fx-loop is more or less the same as being between the purple and green areas when in the stereo out (35-40%?). Also, once you go higher, it gets <em>waaaay brighter<\/em> than if you were in a normal fx-loop mode.<\/p>\n<p>Overall, the green area is what I would consider to be ideal for most uses. It has fizz completely eliminated, and is able to put back some highs that were possibly lost in the fizz-killing process. Anything above that (yellow to red) is already obnoxiously bright IMHO &#8211; though some people might prefer that. The question that I keep asking myself is if those differences actually matter at the upper register of the drive pot (yellow to red). I honestly can&#8217;t imagine anyone wanting to use a setting above 50% (probably 40% on a stereo out).<\/p>\n<p>Eventually, Mr. Hockensmith explained why the <em>drive adjustment pot<\/em> was designed that way:<\/p>\n<blockquote>\n<p>Keep in mind that the HC&#8217;s Blend control is intentionally &#8220;overdesigned&#8221; &#8211; the extra brightness is needed in some cases when the impedance is less than ideal.  Plus you actually get a bit more HC effect by running the blend higher and reducing the highs on the modedler &#8211; I usually recommend starting at 50%.<\/p>\n<\/blockquote>\n<p>This point is further discussed in the FAQ section of <a href=\"http:\/\/bossgtcentral.com\/forum\/showthread.php?t=7574\" title=\"Visit offical information page\">Radley&#8217;s Corner.<\/a><\/p>\n<hr \/>\n<p>Before that explanation came (the FAQ was just recently updated. A lot of the new points, I&#8217;m quite certain, were added in light of this review), I didn&#8217;t discount the possibility that perhaps the sample I used wasn&#8217;t the best candidate to show how the HC affects those ranges, because I&#8217;ve heard reviews where some users claim that they like having it at 100%. From what I&#8217;m hearing, you can possibly utilize those upper ranges of the HC pot properly if you <strong>start with a relatively fat tone.<\/strong><\/p>\n<p>To test that theory out, I pulled out a patch I made that had sort of a round tone (instead of the usual &#8220;scooped&#8221; hi-gain metal tones people like). It&#8217;s the guitar sound I used for a song I have in the works:<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063169%3Fsecret_token%3Ds-F2udH&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>Isolating that same tone, I <a title=\"load audio content\" href=\"javascript:loadXML('\/music\/playerXML.php?path=\/downloads\/HCsamples\/HCsweep_custom.mp3&#38;title=HC sweep - Not Welcome (guitar sound)','AJAXdiv06')\">tried to do a sweep on it as well,<\/a> but only through the fx-loop. It has already been established earlier that the effect of the HC is more pronounced coming from a stereo out, so it would be a waste of time and effort to have to prepare clips for each and every different audio sample just to reiterate what we already know.<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063125%3Fsecret_token%3Ds-TuAMN&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>For this clip, I killed the phaser and reverb on the patch so it would be easier to hear the HC&#8217;s effect. Notice that even with the HC on 100% blend, the tone is still quite tolerable &#8211; which basically proves that the HC&#8217;s effect will depend on the tone you throw at it. I feel it is important to reiterate this point:<\/p>\n<div align=\"center\">\n<h3>The HC&#8217;s effect will depend on the tone you throw at it.<\/h3>\n<\/div>\n<hr \/>\n<p>Just so you guys could have more clips to absorb, I did the guitar part of my song earlier. The first pass is the original sound as you hear it in the mix (just played a bit differently to hear more palmed chords), the second is running it through the HC at 50% and tweaking the EQ a bit to compensate for the added brightness.<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063096%3Fsecret_token%3Ds-cCpNB&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>The nice thing about this clip is that the source sound <strong>has minimal or no fizz to begin with.<\/strong> One of Mr. Hockensmith&#8217;s frustrations is that people dismiss the HC as a simple &#8220;fizz-killer&#8221; &#8211; and base their purchasing decisions on that premise. If you don&#8217;t have fizz, it doesn&#8217;t necessarily mean that the HC has nothing else to offer you. This clip proves that point to a certain extent.<\/p>\n<p>Notice how the individual notes on the second pass have more definition compared to the first &#8211; <strong>especially<\/strong> on the first three chords (the first 9th on the <code>F<\/code>, the second regular <code>G<\/code> power chord, and the <code>C9\/A<\/code>) &#8211; and the last open <code>Am<\/code>. There&#8217;s also the inherent addition of the &#8220;bite&#8221;\/brilliance we were talking about earlier which allows these chords to be as defined as they are.<\/p>\n<hr \/>\n<p>Next, we have the the other extreme people want to know about &#8211; how the HC affects <em>super-clean<\/em> tone. But before we get into that, it&#8217;s worth mentioning that the HC was never designed for these types of tones. The HC was built for <em><strong>electric guitar<\/strong> tones<\/em> (e.g. clean electric, overdriven, etc). The logic behind this is the same reason why you simply <strong>don&#8217;t<\/strong> plug in an acoustic guitar on an electric guitar amp. This is all discussed as well in one of the FAQs in <a href=\"http:\/\/bossgtcentral.com\/forum\/showthread.php?t=7574\" title=\"Visit offical information page\">Radley&#8217;s Corner<\/a>.<\/p>\n<p>However, I felt I needed to include this clip is because there <em>are<\/em> electric guitars that have acoustic guitar tones. My Taylor T5, which is an electric guitar by nature, is such an instrument. Same holds true for a Line-6 Variax, or similar guitars. Hell, even most multi-fx modelers have patches that <em>simulate<\/em> acoustic guitar tones nowadays. So for people who do need those types of tones, here are the implications of running your modeler through the HC. This small &#8220;exception to the rule&#8221; becomes a legitimate concern once you consider using a stereo HC, because normally, you couldn&#8217;t &#8220;disable&#8221; it. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_10');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_10');\" ><sup id=\"footnote_plugin_tooltip_605_1_10\" class=\"footnote_plugin_tooltip_text\">10 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_10\" class=\"footnote_tooltip\">Unless you find some sick joy in constantly turning that drive pot whenever you switch patches. Or if you want to try putting a stereo HC on an fx-loop &#8211; it will probably work, but not as efficiently, as proven in the HC Test Drive.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_10').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_10', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<p>What I did was just use a clean patch I made for the T5, strummed a <code>G<\/code> chord three times, each time having different HC levels applied (bypass, 50%, 100%). This was the result.<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063088%3Fsecret_token%3Ds-5gmte&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>In this case, it performed like a simple cabinet emulator or amp simulator (e.g. SansAmp, etc.). Obviously, the HC has nothing to contribute for people who include these types of tones in their setup &#8211; which is why I think it is best to be put in the fx-loop and have it only effect <em>electric<\/em> tones (this includes clean electric tones). I will discuss this point in detail later in the review. For now, suffice to say, that if you &#8220;live&#8221; in these types of tones, chances are you won&#8217;t be able to enjoy the HC&#8217;s benefits much unless you have a way of disabling it.<\/p>\n<hr \/>\n<p>The next clips are kinda redundant to all the other HC review clips we&#8217;ve all found floating around the internet &#8211; it focuses on hi-gain. I included it here for posterity&#8217;s sake. I do have some points to share as well however, after you have listened to them.<\/p>\n<p>Here are some samples based on a &#8220;Metallica&#8221; patch I found floating in BossGTCentral a few years back. It features a phrase I played <em>5<\/em> times, using <em>5 different settings<\/em> I did on that very same patch. Namely:<\/p>\n<ol>\n<li>Adjusted to kill fizz &#8211; hi-freq cutoff set at <strong>4KHz<\/strong><\/li>\n<li>hi-freq cutoff set at <strong>3KHz<\/strong><\/li>\n<li>hi-freq cutoff <strong>disabled<\/strong><\/li>\n<li>HC enabled, EQ adjusted to compensate for being overly bright. hi-freq cutoff <strong>disabled<\/strong><\/li>\n<li>Same settings as #4, with the HC bypassed.<\/li>\n<\/ol>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063148%3Fsecret_token%3Ds-noT0g&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>Now, the point of these samples was to address the whole high-frequency cutoff\/rolloff people say the HC does. They often dismiss it as a simple EQ filter (an LPF <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_11');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_11');\" ><sup id=\"footnote_plugin_tooltip_605_1_11\" class=\"footnote_plugin_tooltip_text\">11 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_11\" class=\"footnote_tooltip\">Low Pass Filter<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_11').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_11', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> to be precise) but hopefully these clips will put that notion to rest. The first pass, for all intents and purposes is pretty decent already. I just did the 3\/8KHz rolloff adjustments to show how a &#8220;LPF&#8221; would probably work when applied or bypassed. The 4th pass shows how the HC performs when optimized for the fundamental tone. Again, the &#8220;quality&#8221; of the tone is determined by how good the person dialing-in tones is. I&#8217;m not arrogant as to assume if this tone I made is good or not &#8211; but the fact remains that if you compare the 1st and 4th, both of which are &#8220;optimized&#8221; for use with and without the HC, you have to agree that while <em>both<\/em> are pretty decent for the purposes of the review, the HC enabled pass still sounds more &#8220;amp-like.&#8221;<\/p>\n<p>While the HC <strong>does<\/strong> a cutoff\/rolloff the upper range of frequencies, it does those adjustments in a <em>tasteful<\/em> and <em>musical<\/em> manner. Should the comparison be made, it&#8217;s <strong>much smarter<\/strong> than an EQ filter.<\/p>\n<hr \/>\n<p>The last clip would be what everyone already heard in the past; stock patches used with the HC bypassed and on. The clip I chose was a patch called &#8220;Natural Speed&#8221; from the GT-8 stock patches. I did no adjustments whatsoever (save for positioning the fx-loop right before the EQ. I did 3 passes, one with the stock sound, one with the HC @ 50%, and one with an &#8220;HC optimized tone.&#8221; For now, don&#8217;t listen to the last pass because I will have you listen to it in context of a point I will try to make.<\/p>\n<p>Listen to the clip below<\/a><\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063188%3Fsecret_token%3Ds-riT7x&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>So as we all know, stock sounds <em>usually<\/em> suck. And we know that while the HC tries its best to fix most of the problems that may be present in a hi-gain tone, it cannot miraculously turn a crappy sound into gold. So the first two passes both sound crappy. The first had fizz and whatnot, the second had no fizz, but was obnoxiously bright. Now the 3rd pass, I will not claim to be the &#8220;right&#8221; sound, but it&#8217;s in the ballpark of what most people would probably prefer. It&#8217;s doesn&#8217;t have fizz, and it&#8217;s not obnoxiously bright.<\/p>\n<p>Having said that, I have one simple question: <strong>Given the 1st and 2nd pass, which would be easier to &#8220;adjust&#8221; to reach the 3rd pass sound?<\/strong><\/p>\n<p>If you&#8217;re really good at dialing-in sound, maybe you could match the 3rd, but how much of the EQ would you have to fiddle with? If the EQ wasn&#8217;t enough, how much more effort would you probably have to invest to make this patch &#8220;useable?&#8221; Change amp\/cab\/distortion combinations? Sure. Change mic placements? Go right ahead. Do whatever the hell you need to take out that fizz, optimize the mids and make it sound more amp-like with whatever tricks you have up your sleeve.<\/p>\n<p>I on the other hand, for the third pass, simply increased the hi-freq cutoff a bit. <strong>That was it!<\/strong> It killed the fizz, it made it more amp-sounding, and while it&#8217;s not as bright, it isn&#8217;t as dull or anemic as when you do a high-freq EQ adjustment without the HC. So the point to be taken home and pondered upon is this:<\/p>\n<div align=\"center\">\n<h3>The HC makes it <em>easier<\/em> for anyone to achieve an ideal tone.<\/h3>\n<\/div>\n<p>While it is good that people be &#8220;trained&#8221; in the intricacies of creating good patches, we are <strong>musicians<\/strong> first and foremost, not engineers. Our time is better spent <strong>making music<\/strong> instead of <strong>adjusting tone.<\/strong><\/p>\n<hr \/>\n<p><em>This bit was done after the review was made. But I felt compelled to let people know about it.<\/em><\/p>\n<p>I noticed something significant while playing with the HC; <strong>most, if not all<\/strong> the overdrive\/distortion (<code>OD\/DIST<\/code>) effects are now &#8220;useable&#8221; at maximum gain. Normally, you&#8217;d have to either back off the gain, use it in conjunction with a preamp setting, or do some heavy EQing to have some palatable <code>OD\/DIST<\/code> sounds.<\/p>\n<p>I recorded <em>each and every one of them,<\/em> enabling the HC at the second half of each pass. I even threw in a mechanical voice to tell which <code>OD\/DIST<\/code> type is being used. The last three (without vocal prompts) are the 3 last &#8220;custom&#8221; types. All other effects were <strong>disabled<\/strong> save for the <em>Noise Suppressor<\/em> (and of course the loop circuitry). <em>Bottom, Tone,<\/em> and <em>Direct Level<\/em> were all set at 0. Gain was set at <em>maximum<\/em> (120). And only the <em>Effect Level<\/em> was adjusted to prevent clipping. HC was set at about 1 o&#8217;clock (about 60%).<\/p>\n<p>Listen to the uber-clip below.<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063182%3Fsecret_token%3Ds-Vn9gk&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>May I remind people that this was a simple on\/off of the HC with a given setting. You still will have to fine-tune the <code>OD\/DIST<\/code> settings to get a better sound. But I&#8217;m sure you can <em>hear<\/em> my point that the HC puts &#8220;new&#8221; life into <code>OD\/DIST<\/code>s that you once thought were unusable (because of the inherent fizz). By simply enabling the HC on typical\/default <code>OD\/DIST<\/code> settings you can already imagine how much <strong>less<\/strong> tweaking is needed to get the tone you want.<\/p>\n<h2>Subjectivity<\/h2>\n<p>Again, it&#8217;s time for the usual reminder that the point of this review was never intended to be about good or bad tone in general. I hope that people <strong>listen to how the HC <em>affects<\/em> the tone.<\/strong> Quite honestly, the audio samples you can find from the web (e.g. <a href=\"http:\/\/www.bossgtcentral.com\/hctestdrive.php\" title=\"HC Test Drive\">HC Test Drive<\/a>, etc.) are really enough &#8211; if you just know what to listen for, you can determine whether or not the HC may be useful to you.<\/p>\n<p>We all have functioning ears and brains. If we can only get over our egos, I&#8217;m sure anybody can notice how the HC <em>can<\/em> be a useful tool based on what it does. I mean there is such as thing as an LPF, possibly one of the simplest forms of &#8220;effects\/filters&#8221; out there &#8211; and there <em>are<\/em> people who have uses for those. Here we have the HC which obviously does <strong>much more<\/strong> to the sound than what any simple filter can do. Having stated the obvious, why is it that people find it so difficult to accept the <em>possibilties<\/em> and <em>potential<\/em> the HC can bring? It truly boggles the mind.<\/p>\n<p>It&#8217;s very true that most people who finally get the HC would much rather make music than talk about it in detail. The reason why I&#8217;m taking the time to do this is because I felt that Mr. Hockensmith&#8217;s efforts have not only been greatly-underappreciated by the people he wanted to help, but has been subject to unreasonable scrutiny and defamation which he does not deserve. Call me a man of fierce principles, but in my own little way, I wanted to help &#8220;correct&#8221; this injustice.<\/p>\n<p>The price of the HC <em>is<\/em> steep, but he has a money-back guarantee on the thing, so I can&#8217;t see why anyone would complain. If you feel that you&#8217;ve just wasted your money, then <strong>return it<\/strong> &#8211; simple as that. Its unbelievable how people even consider the &#8220;secrecy&#8221; surrounding his circuit as a &#8220;fault&#8221;; he has every right to not disclose details on <em>his<\/em> creation. It&#8217;s his circuit, he can do whatever the hell he want&#8217;s with it. If you don&#8217;t appreciate it, them fu**ing make your own!<\/p>\n<p>Bascially, <em>all<\/em> negative arguments I&#8217;ve ever heard, read, and seen can easily be distilled to simple <em>sour-graping<\/em> &#8211; because other than that, I fail to see <em>any<\/em> scenario where anyone would be &#8220;justified&#8221; to criticize him the way they&#8217;ve been doing. It&#8217;s one thing to be skeptical, unconvinced even &#8211; but a whole other thing to pontificate at the expense of a well-meaning person&#8217;s reputation.<\/p>\n<p>Anyways, we digress. Lets get back on topic and now discuss how to maximize the use of your HC. The next sections may branch out and discuss broad topics that are not related to the HC, but I feel that these needed to be discussed so people can have a better grasp of things once you talk in context of the HC. You can think of them as stating postulates in Mathematics&#8230; before you get into the topic of &#8220;proving.&#8221;<\/p>\n<h2>Loop or Stereo Out?<\/h2>\n<p>The HC, exluding any customization requests, usually comes in two flavors. A <strong>loop<\/strong> and a <strong>stereo out<\/strong> version. There are valid situations that require the need for each, all of which is explained in the FAQ section of <a href=\"http:\/\/bossgtcentral.com\/forum\/showthread.php?t=7574\" title=\"Visit offical information page\">Radley&#8217;s Corner<\/a><\/p>\n<p>I however, feel that devices like the HC are <strong>always<\/strong> better in an fx-loop. But to understand the value of the loop, one must understand the value of the effects chain.<\/p>\n<h2>The Importance of the Effects Chain<\/h2>\n<p>Some people may think that effects location in a signal path is a trivial thing. It is not, the locations of your effects in relation to each other can make a world of difference. Let me demonstrate (and these demonstration clips have <em>nothing<\/em> to do with the HC):<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063177%3Fsecret_token%3Ds-ofQaz&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>That clip has the <em>Whammy<\/em> (or Pitch Bend) effect somewhere at the end of the chain; which was only choice I had when I was still using an old Digitech RP-10 way back. For some reason, the effect was located at the latter part of the chain, and every patch I used (distorted or otherwise) had that dead-giveaway digitally processed sound when using the <em>Whammy.<\/em> Here&#8217;s the <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/227\/508832487_7804f599f2_o.gif\" target=\"_blank\" title=\"You may click on the image for more details\">effects chain of the RP-10<\/a> in case anyone&#8217;s interested.<\/p>\n<p>Now if you would buy a newer model multi-fx processor by Digitech (and I guess all the other brands as well), you&#8217;ll notice that such an effect, if available, is now located somewhere in the <em>beginning<\/em> of the chain (here&#8217;s <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/195\/508832459_5d6319a351_o.gif\" target=\"_blank\" title=\"You may click on the image for more details\">the schematic<\/a> for that). With the Whammy in such a location, the overall tone would sound like this:<\/p>\n<div align=\"center\">\n<!-- iframe plugin v.5.1 wordpress.org\/plugins\/iframe\/ -->\n<iframe loading=\"lazy\" width=\"100%\" height=\"20\" scrolling=\"no\" frameborder=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/306063186%3Fsecret_token%3Ds-H3PuS&#038;color=ff5500&#038;inverse=false&#038;auto_play=false&#038;show_user=false\" class=\"iframe-class\"><\/iframe>\n<\/div>\n<p>So, to reiterate, location of effects in your signal path can make <strong>a world<\/strong> of difference.<\/p>\n<p>For manufacturers who use fixed effects order in their pedalboards, the importance of knowing what the optimum arrangement of effects is very important. And while there may be an unspoken consensus for the most part (like how reverbs always go last), there are still varying opinions on the subject matter. Take for example the <a rel=\"lightbox\" href=\"http:\/\/farm1.static.flickr.com\/226\/508807006_b73cb7adb1_o.gif\" target=\"_blank\" title=\"You may click on the image for more details\">Line6 XT Live<\/a> and compare its effects chain to the Digitech GNX4 mentioned above; the location of their compressors and gates (among other things) are radically different. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_12');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_12');\" ><sup id=\"footnote_plugin_tooltip_605_1_12\" class=\"footnote_plugin_tooltip_text\">12 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_12\" class=\"footnote_tooltip\">In all honesty, I prefer the Line6&#8217;s compressor location over the Digitech, but I prefer the GNX4&#8217;s gate location over the XT Live.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_12').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_12', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<p>Incidentally, this issue\/concern doesn&#8217;t apply to GT-8 users because we can set our own effects chain order. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_13');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_13');\" ><sup id=\"footnote_plugin_tooltip_605_1_13\" class=\"footnote_plugin_tooltip_text\">13 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_13\" class=\"footnote_tooltip\">Incidentally, that was the feature that made me choose the GT-8 over the XTL.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_13').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_13', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<p>Now that the importance of the effects chain has been established, then naturally it stands to reason that if you plan to put any other effect in your chain, most of the time, you&#8217;d probably <strong>not<\/strong> want it at the end of everything &#8211; and this will also be clarified in the paragraphs below.<\/p>\n<h2>Why the Loop?<\/h2>\n<p>2 simple reasons<\/p>\n<ol>\n<li>You won&#8217;t be coloring effects that [usually] prefer <strong>not<\/strong> to be colored. These are your delays, reverbs, etc. &#8211; which are ideally <em>last<\/em> in the fx-chain.<\/li>\n<li>Because you can disengage the HC easily if needed &#8211; at least that&#8217;s how it is with the GT-8 (just make a patch that doesn&#8217;t have the loop enabled).<\/li>\n<\/ol>\n<p>With the HC on a stereo out, you don&#8217;t get these benefits at all. It <em>will<\/em> be the <strong>last<\/strong> and <strong>constant<\/strong> thing that colors your tone. Whether that&#8217;s a good or bad thing, I&#8217;ll leave for you to decide.<\/p>\n<h2>Loop HC and FRFR &#8211; a match made in heaven<\/h2>\n<p>Here&#8217;s something to think about; the reason(s) why dialing-in tones optimized for FRFR <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_14');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_14');\" ><sup id=\"footnote_plugin_tooltip_605_1_14\" class=\"footnote_plugin_tooltip_text\">14 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_14\" class=\"footnote_tooltip\">Full-Range, Flat-Response<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_14').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_14', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> is useful:<\/p>\n<p>If you want to record with the least amount of generation loss (or least amount of noise), you want to take the shortest path you can take to the mixer. If it&#8217;s possible to go directly, then that would be awesome. The reason people still mic amps and speakers instead of going in hot is precisely because the tones direct from their multi-fx lack the warmth, saturation, and urgency (due to the excitation of the strings) than when running them through a live rig (tube amps, etc.). The HC can bring a lot of that warmth, saturation, and urgency without having to go through all of those.<\/p>\n<p>Having stated the above, when recording through &#8220;live rigs,&#8221; the biggest problem is if the studio <em>has<\/em> the equipment that you need to achieve that tone. If it doesn&#8217;t have the stuff you need, either you bring it yourself, our have them rent it. Again, with the HC, you eliminate most of those logistical problems.<\/p>\n<p>Of course, recording through live rigs still has its benefits (e.g. excitation of the strings through a loudspeaker), so that method won&#8217;t be going away <em>ever.<\/em> Having said that though; <em>all<\/em> studios have got <em>at least<\/em> keyboard amps, and those things don&#8217;t have the usual &#8220;colorization&#8221; that guitar tube-amps (or whatever) bring &#8211; they are essentially FRFR &#8220;amp\/speakers&#8221; as well. With the HC, you can use a keyboard amp (hell, even some studio monitors) as your loudspeaker, and have the former handle all the &#8220;amp-isms,&#8221; or &#8220;tube-isms&#8221; that you need for your tone. And like the acoustic clip you heard above, you can even switch to such tones without having to change amps\/speakers to accommodate the highs which electric gutar amps\/speakers cannot represent.<\/p>\n<p>Same argument applies to live performances. Live venues will more often than not, have less than ideal guitar amps for the aspiring musician. You can&#8217;t expect a venue to have <em>this or that<\/em> particular amp which <em>this or that<\/em> particular &#8220;performer&#8221; prefers to use with their tone &#8211; unless of course you&#8217;re rich and famous (which means that you&#8217;ll probably be bringing the equipment you need yourself) For the aspiring performer however, either you bring the stuff you need, or just work with what you have.<\/p>\n<p>But guess what! If there&#8217;s one thing most if not all venues have, is a PA system &#8211; you have your FRFR input right there for the taking! Just have a parallel output to some <em>any<\/em> amp near you so you can hear yourself, and if the sound engineer is doing a good job, you could be confident that what your audience hears is that nice warm, saturated, analog feel the HC has given you.<\/p>\n<p>Lastly, it&#8217;s easier to adjust tones <em>wherever<\/em> you are. You don&#8217;t need to run your effects through that favorite speaker of yours whenever you feel like experimenting on your sound. Just bring a set good headphones (again, an FRFR setup) and dial-away. You can probably even do that while your wife is sleeping next to you LOL!<\/p>\n<p>So we&#8217;ve established all the benefits FRFR has when you want to have a really well-rounded portable tone. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_15');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_15');\" ><sup id=\"footnote_plugin_tooltip_605_1_15\" class=\"footnote_plugin_tooltip_text\">15 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_15\" class=\"footnote_tooltip\">Plus, you don&#8217;t have a choice if you want to have authentic acoustic tones in your arsenal.<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_15').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_15', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script> Naturally, a HC in the fx-loop is the best way to maximize its usefulness for your FRFR rig. <span class=\"footnote_referrer\"><a role=\"button\" tabindex=\"0\" onclick=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_16');\" onkeypress=\"footnote_moveToReference_605_1('footnote_plugin_reference_605_1_16');\" ><sup id=\"footnote_plugin_tooltip_605_1_16\" class=\"footnote_plugin_tooltip_text\">16 <\/sup><\/a><span id=\"footnote_plugin_tooltip_text_605_1_16\" class=\"footnote_tooltip\">Which will probably only be comprised of your guitar, pick, effects, HC, and cables \ud83d\ude09 &#8211; how&#8217;s that for portability!<\/span><\/span><script type=\"text\/javascript\"> jQuery('#footnote_plugin_tooltip_605_1_16').tooltip({ tip: '#footnote_plugin_tooltip_text_605_1_16', tipClass: 'footnote_tooltip', effect: 'fade', predelay: 0, fadeInSpeed: 200, delay: 400, fadeOutSpeed: 200, position: 'top right', relative: true, offset: [10, 10], });<\/script><\/p>\n<h2>Impressions<\/h2>\n<p>To wrap up, let me share my more personal thoughts on the HC.<\/p>\n<p>I&#8217;m utterly impressed by this little thing. It performs as advertised, it looks <em>so<\/em> sexy, and it&#8217;s built like a tank &#8211; pretty much high-quality all around.<\/p>\n<p>I was ecstatic once I actually heard the result with my own ears. I&#8217;ve been contemplating on buying the HC ever since I got the GT-8, which was a couple of years ago, and been reading up on it to see if it was really worth shelling out money for. I was able to get the tone I like with some post-processing in the computer (when recording), which made me forget about the HC for a while. But once you have more stuff happening in your music, more software plugins or synths being used, you can easily hit a brick wall once your computer starts hiccuping because of the load. So I eventually decided to bite the bullet and spend on the HC, and I can say is that once get to use one, you&#8217;ll realize that it was an investment that was worth every penny.<\/p>\n<p>The great thing about the HC is how it transforms your tone to sound like it&#8217;s going through legitimate analog gear &#8211; it doesn&#8217;t sound digital <em>at all.<\/em> I particularly could appreciate this because I like recording directly to my PC, and getting that warm analog saturation directly to my box without having to post-process anything through software is a godsend.<\/p>\n<p>I guess if I were to create a general truth I noticed about the HC, it would be this:<\/p>\n<p>As far as distortion goes, using the HC will make it easier for anyone to come close to achieving their desired tone. I&#8217;ll even go out on a limb here and state this as a <strong>fact.<\/strong> While you may not need the HC, if you like distortion, and if you&#8217;re considering on getting an HC, I <em>guarantee<\/em> you won&#8217;t be disappointed. It <em>will<\/em> make your life so much easier. Having the HC as part your chain will get you to your goal using less &#8220;tweaks&#8221; than you would have probably done without it. This is a fact anyone will realize themselves once they use an HC.<\/p>\n<h2>Conclusions<\/h2>\n<p>Here&#8217;s a nice summary of the qualities of the HC as Mr. Hockensmith described (in <strong>bold<\/strong>). I will try to comment on some points if applicable.<\/p>\n<ol>\n<li>\n<p><strong>It eliminates <em>unnatural<\/em> fizz (a minimal amount of <em>natural<\/em> fizz is necessary for a good tonal spread).<\/strong><br \/>\nThis is very true, as <em>everyone<\/em> has heard since the first samples of the HC a few years back.<\/p>\n<\/li>\n<li>\n<p><strong>It makes building patches much easier and quicker, because the &#8220;sweet spot&#8221; is greatly enlarged.<\/strong><br \/>\nYes, and this has been discussed in detail at the tail end of the <em>&#8220;Show me the money!&#8221;<\/em> section of the review<\/p>\n<\/li>\n<li>\n<p><strong>Makes clean sounds more amplike and less chinky\/brittle\/direct-sounding when &#8220;digging in&#8221;, while maintaining presence.<\/strong><br \/>\nAbsolutely, this is the other major magical thing the HC does aside from effectively killing fizz.<\/p>\n<\/li>\n<li>\n<p><strong>Makes listening with headphones a pleasure (no more mosquito-tone!) ;o)<\/strong><br \/>\nVery true, the significance and benefit of this effect also is magnified by the situations cited in the <em>&#8220;HC and FRFR &#8211; a match made in heaven&#8221;<\/em> section<\/p>\n<\/li>\n<li>\n<p><strong>The HC improves the actual &#8220;feel&#8221; of the modeler &#8211; this is especially obvious in the upper registers (high up the guitar neck).<\/strong><br \/>\nI honestly haven&#8217;t tried listening for this, but given how the HC affects the tone, I could imagine that being the case.<\/p>\n<\/li>\n<li>The way it manipulates the &#8220;timbre&#8221; of the fundamental tone is so efficient, that the quality of the new sound will start a chain reaction of pleasant surprises &#8211; namely:  \n<ol>\n<li><strong>It adds a missing &#8220;aggressive ingredient&#8221; (bite\/snarl\/presence\/brilliance) &#8211; it&#8217;s like the sound of tubes straining to the point of compression, and on the verge of distortion.<\/strong>  &#8211; I&#8217;d normally call this <em>saturation,<\/em> but since it focuses on the upper mids to achieve this, I&#8217;d say the words used above are more appropriate. In any case I&#8217;ve confirmed this phenomenon by my own ears &#8211; and hopefully everyone else heard it as well.  <\/li>\n<li><strong>It not only tightens the low end, but tightens the highs as well &#8211; this results in more clarity even when playing chords, and makes it possible to add considerable low end without boominess. &#8211; &#8220;Phat City&#8221;.<\/strong>  <\/li>\n<li><strong>It causes the sound to &#8220;stand up&#8221; in a mix, without sounding &#8220;thin&#8221; &#8211; much easier to get a Solo on top without &#8220;dwarfing&#8221; the mix.<\/strong>  <\/li>\n<li><strong>Enhances the fundamental tone\/attack of the note, thereby increasing clarity (especially with distortion tones).<\/strong>  <\/li>\n<\/ol><\/li>\n<\/ol>\n<p>So overall, <em>every point<\/em> made here has been confirmed to be true &#8211; and taking into consideration that the HC is a <strong>passive<\/strong> device; one can appreciate more how awesome of a gadget it is. It acts like an <em>active<\/em> device, but you don&#8217;t need to invest in batteries. It&#8217;s built like a tank so it would probably last for a ridiculously long time. And most importantly, <strong>it works as advertised,<\/strong> this has been proven time and time again from <em>any user<\/em> and <em>any review;<\/em> so there&#8217;s really no reason why people should be skeptical as far as what it does goes. It does what the creator says it does &#8211; <strong>period.<\/strong> You even get a money-back guarantee on that.<\/p>\n<p>The only issue is the steep price, but let me tell you, a SansAmp can cost up to 250+ dollars as well, and those are assembly-line built by now. For the sake of argument, let&#8217;s say <strong>part<\/strong> of the HC&#8217;s effect was similar to such devices. But the tonal transformation of the HC is way better than those devices <em>hands down.<\/em> Plus it even has an added benefit of killing fizz. So if an assembly line, <strong>active<\/strong> product that&#8217;s <em>not<\/em> as sturdy, and is <em>less<\/em> effective, could cost the same as an HC, which is hand-made, works flawlessly and doesn&#8217;t need any maintenance at all (e.g. batteries or power supplies), and is built to last (when I say the HC is built like a tank, I <em>really mean it<\/em>).  Can anyone <em>really<\/em> claim that the HC is overpriced?<\/p>\n<p>Even if it <em>was,<\/em> here&#8217;s how I see it. I honestly wouldn&#8217;t mind if in time some company in China sells something similar to it for 20 bucks, but for as long as that day hasn&#8217;t arrived, I also don&#8217;t mind paying a premium for something that can greatly contribute to my tone. The <em>real<\/em> question we should all be asking ourselves is <strong>how much do you think your ideal tone is worth?<\/strong> Honestly, if people can spend tens of thousands of dollars on tube amps and whatnot just to achieve their &#8220;ideal tone,&#8221; I don&#8217;t think $200-$300 is a big price to pay.<\/p>\n<p>Anyways, I&#8217;ve given my 2 cents worth &#8211; now it&#8217;s time to make some music!!!<\/p><div class=\"speaker-mute footnotes_reference_container\"> <div class=\"footnote_container_prepare\"><p><span role=\"button\" tabindex=\"0\" class=\"footnote_reference_container_label pointer\" onclick=\"footnote_expand_collapse_reference_container_605_1();\">Notes<\/span><span role=\"button\" tabindex=\"0\" class=\"footnote_reference_container_collapse_button\" style=\"display: none;\" onclick=\"footnote_expand_collapse_reference_container_605_1();\">[<a id=\"footnote_reference_container_collapse_button_605_1\">+<\/a>]<\/span><\/p><\/div> <div id=\"footnote_references_container_605_1\" style=\"\"><table class=\"footnotes_table footnote-reference-container\"><caption class=\"accessibility\">Notes<\/caption> <tbody> \r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_1');\"><a id=\"footnote_plugin_reference_605_1_1\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>1<\/a><\/th> <td class=\"footnote_plugin_text\">Which will be discussed in even greater detail later in the review<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_2');\"><a id=\"footnote_plugin_reference_605_1_2\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>2<\/a><\/th> <td class=\"footnote_plugin_text\">I was lucky enough to download the samples, that old forum is now gone. Also take note that the clips start with the circuits ENGAGED, then switch on and off every so often.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_3');\"><a id=\"footnote_plugin_reference_605_1_3\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>3<\/a><\/th> <td class=\"footnote_plugin_text\">At least that&#8217;s what he says &#8211; we have no way of knowing, really.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_4');\"><a id=\"footnote_plugin_reference_605_1_4\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>4<\/a><\/th> <td class=\"footnote_plugin_text\">Take note I said AS FAR AS FIZZ GOES &#8211; because it would be tragic if you would dismiss the HC simply because you thought it was a mere fizz-killing device.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_5');\"><a id=\"footnote_plugin_reference_605_1_5\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>5<\/a><\/th> <td class=\"footnote_plugin_text\">Frequently Asked Questions<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_6');\"><a id=\"footnote_plugin_reference_605_1_6\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>6<\/a><\/th> <td class=\"footnote_plugin_text\">Potentiometer<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_7');\"><a id=\"footnote_plugin_reference_605_1_7\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>7<\/a><\/th> <td class=\"footnote_plugin_text\">And from what I&#8217;m seeing, it seems to be pretty high \ud83d\ude42 <\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_8');\"><a id=\"footnote_plugin_reference_605_1_8\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>8<\/a><\/th> <td class=\"footnote_plugin_text\">Just make sure you&#8217;re listening through good speakers or cans<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_9');\"><a id=\"footnote_plugin_reference_605_1_9\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>9<\/a><\/th> <td class=\"footnote_plugin_text\">As a result of having gone through the &#8220;fizz-killer&#8221; section.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_10');\"><a id=\"footnote_plugin_reference_605_1_10\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>10<\/a><\/th> <td class=\"footnote_plugin_text\">Unless you find some sick joy in constantly turning that drive pot whenever you switch patches. Or if you want to try putting a stereo HC on an fx-loop &#8211; it will probably work, but not as efficiently, as proven in the HC Test Drive.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_11');\"><a id=\"footnote_plugin_reference_605_1_11\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>11<\/a><\/th> <td class=\"footnote_plugin_text\">Low Pass Filter<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_12');\"><a id=\"footnote_plugin_reference_605_1_12\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>12<\/a><\/th> <td class=\"footnote_plugin_text\">In all honesty, I prefer the Line6&#8217;s compressor location over the Digitech, but I prefer the GNX4&#8217;s gate location over the XT Live.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_13');\"><a id=\"footnote_plugin_reference_605_1_13\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>13<\/a><\/th> <td class=\"footnote_plugin_text\">Incidentally, that was the feature that made me choose the GT-8 over the XTL.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_14');\"><a id=\"footnote_plugin_reference_605_1_14\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>14<\/a><\/th> <td class=\"footnote_plugin_text\">Full-Range, Flat-Response<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_15');\"><a id=\"footnote_plugin_reference_605_1_15\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>15<\/a><\/th> <td class=\"footnote_plugin_text\">Plus, you don&#8217;t have a choice if you want to have authentic acoustic tones in your arsenal.<\/td><\/tr>\r\n\r\n<tr class=\"footnotes_plugin_reference_row\"> <th scope=\"row\" class=\"footnote_plugin_index_combi pointer\"  onclick=\"footnote_moveToAnchor_605_1('footnote_plugin_tooltip_605_1_16');\"><a id=\"footnote_plugin_reference_605_1_16\" class=\"footnote_backlink\"><span class=\"footnote_index_arrow\">&#8673;<\/span>16<\/a><\/th> <td class=\"footnote_plugin_text\">Which will probably only be comprised of your guitar, pick, effects, HC, and cables \ud83d\ude09 &#8211; how&#8217;s that for portability!<\/td><\/tr>\r\n\r\n <\/tbody> <\/table> <\/div><\/div><script type=\"text\/javascript\"> function footnote_expand_reference_container_605_1() { jQuery('#footnote_references_container_605_1').show(); jQuery('#footnote_reference_container_collapse_button_605_1').text('\u2212'); } function footnote_collapse_reference_container_605_1() { jQuery('#footnote_references_container_605_1').hide(); jQuery('#footnote_reference_container_collapse_button_605_1').text('+'); } function footnote_expand_collapse_reference_container_605_1() { if (jQuery('#footnote_references_container_605_1').is(':hidden')) { footnote_expand_reference_container_605_1(); } else { footnote_collapse_reference_container_605_1(); } } function footnote_moveToReference_605_1(p_str_TargetID) { footnote_expand_reference_container_605_1(); var l_obj_Target = jQuery('#' + p_str_TargetID); if (l_obj_Target.length) { jQuery( 'html, body' ).delay( 0 ); jQuery('html, body').animate({ scrollTop: l_obj_Target.offset().top - window.innerHeight * 0.2 }, 380); } } function footnote_moveToAnchor_605_1(p_str_TargetID) { footnote_expand_reference_container_605_1(); var l_obj_Target = jQuery('#' + p_str_TargetID); if (l_obj_Target.length) { jQuery( 'html, body' ).delay( 0 ); jQuery('html, body').animate({ scrollTop: l_obj_Target.offset().top - window.innerHeight * 0.2 }, 380); } }<\/script>","protected":false},"excerpt":{"rendered":"<p>As I mentioned in an old post, I bought something called the Harmonic Converger. I put the device through its paces and have done my first full-length review of the thing &#8211; actually it&#8217;s my first full-length review of anything. I&#8217;d like to remind people that I am not affiliated with the creator in any &hellip; <p class=\"link-more\"><a href=\"http:\/\/nargalzius.com\/blog\/archives\/2007\/06\/01\/harmonic-converger\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Harmonic Converger&#8221;<\/span><\/a><\/p><\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false},"version":2}},"categories":[7,8,6,13],"tags":[379,510,532,535,754,803,880],"class_list":["post-605","post","type-post","status-publish","format-standard","hentry","category-media","category-music","category-reviews","category-technology","tag-effects","tag-guitar","tag-harmonic-converger","tag-hc","tag-media","tag-music","tag-passive"],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack-related-posts":[],"_links":{"self":[{"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/posts\/605","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/comments?post=605"}],"version-history":[{"count":4,"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/posts\/605\/revisions"}],"predecessor-version":[{"id":1951,"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/posts\/605\/revisions\/1951"}],"wp:attachment":[{"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/media?parent=605"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/categories?post=605"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/nargalzius.com\/blog\/wp-json\/wp\/v2\/tags?post=605"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}